Ubiquiti Networks UniFi Guida Utente

Enterprise WiFi SystemModels: UAP/UAP-LR (Long Range)

4. Secure the Mounting Bracket to the ceiling tile using the Ceiling Backing Plate, M3x50 Flathead Screws, and M3Keps Nuts. Then feed the Ethernet c

5. Set the ceiling tile back into place.6. Connect the Ethernet cable to the Ethernet port.7. Align the notch on the UniFi AP with the notch on the

Powering the UniFi APThe UniFi AP can be powered directly by a Ubiquiti Networks TOUGHSwitch or with the included PoE Adapter.Connecting to the TOUGHS

Connecting Power over Ethernet1. Connect the other end of the Ethernet cable coming from the Ethernet port on the UniFi AP to the Ethernet port label

Software InstallationDownload and install the latest version of the UniFi Controller software at downloads.ubnt.com/unifi. Launch the software and fol

SpecificationsUAP/UAP-LRDimensions 200 x 200 x 36.5 mmWeight 290 g (430 g with Mounting Kits)Networking Interface (1) 10/100 Ethernet PortButtons Rese

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de

DisclaimerEXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE

NoteSome countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You

IntroductionThank you for purchasing the Ubiquiti Networks™ UniFi™ Enterprise WiFi System. The UniFi Enterprise WiFi System includes the UniFi Control

Industry CanadaThis Class A digital apparatus complies with Canadian ICES-003.To reduce potential radio interference to other users, the antenna type

RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging

EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal

© 2011-2013 Ubiquiti Networks, Inc. All rights reserved. J061913—720-00055-01Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo U

System Requirements• Microsoft Windows Vista, Windows 7, Windows 8, or MacOSX• Java Runtime Environment 1.6 (or above)• Web Browser: Mozilla Fire

Hardware OverviewLEDLED Color StatusFlashing AmberInitializing.Steady AmberFactory default, waiting to be integrated.Alternating Amber/GreenDevice is

PortsEthernet PortReset ButtonLocking NotchEthernet The Ethernet port is used to connect the power and should be connected to the LAN and DHCP server

Installation Requirements• CAT5/6 cable• Phillips screwdriver• Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)• Optional

4. Insert the M3x20 Screw Anchors into the 6 mm holes. Secure the Mounting Bracket to the wall by inserting the M2.9x20 Screws into the anchors.5. C

6. Align the notch on the UniFi AP with the notch on the Mounting Bracket.7. Turn the UniFi AP clockwise until it locks into place.

Ceiling Mount1. Remove the ceiling tile.2. Place the Mounting Bracket in the center of the ceiling tile. Mark the three mounting screw holes and 25